Cisco Compatible 10G DWDM SFP+ Transceivers 1560.61nm 40km DOM LC SMF

FS SFP10G-60.61 Compatible 10G DWDM SFP+ 1560.61nm 40km DOM LC SMF Transceiver

Product Features

● Supports 9.95 to 11.3 Gb/s bit rates

● Duplex LC connector

● Hot pluggable SFP+ footprint

● Cooled EML transmitter and PIN-TIA receiver

● Applicable for 40km SMF connection

● Low power consumption, < 1.3W

● 100 GHz channel spacing

● Digital Diagnostic Monitor Interface

● Optical interface compliant to ITU-T 694.1& G.698.1

● Electrical interface compliant to SFF-8431& SFF-8432

● Operating case temperature:

Commerical:0 to 70 °C Industrial:-40 to 85 °C

Applications

● 10G Ethernet

● 2x,4x, 8x Fiber Channel

● ITU-T G.698.1

● Other optical links

Product Descriptions

Olinkcom’ OLSDxx1XL-C(I)D40 Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 40km over SingleMode fiber. They are compliant with SFF- 8431,SFF-8432 and ITU-T G.698.1. The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecommunication.

This transceiver consists of two sections: The transmitter section incorporates a cooled EML laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Measured 2^{31 – 1} PRBS@10.3125G

2. Measured with worst ER=8.2dB; 2^{31 – 1} PRBS@10.3125G

More details:

a.This item besides 100% support FS,also compatible with Juniper,Cisco,D-link,Ciena,MikroTik ect.

b.Warranty:3years

c.we have a very professional team of technical,can be always online to give you better solutions based on your problems.

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.