Edgecore ET5402-ER Compatible 10GBASE-ER SFP+ 1550nm 40km Transceiver

OLSP551XL-CD40 is a third party transceiver designed for use with Edgecore 10G networking equipment. This SFP+ module supports data-rate of 10.3125Gbps (10GBASE-ER), providing 10-Gigabit connectivity for up to 40 km over single mode fiber cable. This SFP+ module is programmed and tested at the factory, to ensure it works with Edgecore 10G Ethernet Switches, Routers, and network card.

Features

● LC Fiber Optic Connector Type

● 100% Guaranteed Compatibility

● Part number and unique product serialization

● Eliminates any network communication conflicts and provides easy identification

● Fully comply with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms

Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Note:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. Into 100Ω differential termination.

3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.

4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Measured with worst ER=5dB

2. PRBS 2^{31 – 1} and BER<10^-12

FAQ:

Q1: How about the warranty ?

All of our products are 3 years warranty (The return and change service within 1 year, repair within 2 years)

Q2: Do you have Minimum order quantity?

We don't have any MOQ.

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.