DOM SR 10G SFP+ Fiber Transceiver Juniper Compatible EX-SFP-10GE-SR

Olinkcom 10GBASE-SR SFP+ 850nm 300m Transceiver Juniper Compatible EX-SFP-10GE-SR

Product Features

● Supports up to 11.3Gb/s bit rates

● 850nm VCSEL transmitter

● PIN Receiver

● Duplex LC connector

● Up to 300m on 50/125um MMF(2000MHZ.KM)

● < 1W Power Dissipation

● Digital Diagnostic Monitor Interface

● Operating case temperature: Commerical:0~70°C, Industrial:-40 to 85 °C

Optical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Measured at 10.3125b/s with PRBS 2^{31 – 1} NRZ test pattern.

2.20%~80%

3.Under the ER worst case=4.5@ 10.3125 Gb/s with PRBS 2^{31 - 1} NRZ test pattern for BER < 1x10^-12

Product Descriptions

Olinkcom’s OLSP851XL-C(I)DS3 Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet over MultiMode fiber. They are compliant with SFF-8431,SFF-8432 and IEEE 802.3ae 10GBASE-SR/SW. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for telecommunication and datacom.

Applications

● 10G Base-SR/SW at 10.3125G

● 10G Fiber Channel

● Other optical links

● 10G Ethernet

Compatibility

Olinkcom's Juniper Compatible 10GBASE-SR SFP+ transceiver can be worked with the below Juniper networks equipment.

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.