Hot Plugable 25G SFP28 Active Optical Cables 10m Cisco Compatible

10m (33ft) Cisco Networks Compatible AOC 25G-10M 25G SFP28 Active Optical Cable

Product Features

• Fully RoHS Compliant
• 1 channel operating up to 25.781 Gbps
• Hot plugable 20pin connector
• Cable length up to 10m
• Low power consumption: ＜1.0W
• Single +3.3V±5% power supply
• Digital Monitoring feature
• Metal enclose for lower EMI
• Operating case temp:
• Commerical:0~70°C

Quick Information:

Applications

• 25G AOC SFP28 Applications
• 25G BASE-SR Ethernet

Standards

• SFF-8431 Rev 3
• SFF-8472 Rev 11

Description:

The Active Optical Cable (AOC) Assemblies for SFP28 Applications is a product to serve 10Gb Ethernet applications. It is designed to enable 10GbE equipment designs with very high port density based on the electrical and mechanical specification.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.

2.Measured at the BER less than 1E-12, back to back. The measure pattern is PRBS 2^31-1 with worst ER=4.5@ 10.3125Gb/s.

3. Internal AC coupled

4. TX-Disable has an internal 4.7KΩ to 10 KΩ pull-up to VccT

5. Measure with 4.7KΩ pull-up to Vcc on host board

We have a strong and experienced after-sales team.Your any question would be well supported.

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.